Sponsered Research
Sponsored Research Projects completed during 2002-2007
| Principal Investigator | Title of the Project | Sponsoring Agency | Outlay (in Lakhs of Rs.) |
| B. K. Mishra
Pradeep Kumar |
Process Parameters Optimization and FEM Modeling of Ultrasonic Srilling Process | AICTE | 5.00 |
2003-04
| B.K. Mishra | Effect of asymmetric heating of fuel pins on fuel bundle integrity | BRNS | 5.04 |
| H.S. Shan | Enhancing Capability of Abrasive Flow Machining Process | DST | 7.98 |
| P.K. Sahoo | Channel Heat Up Experiment –I: Pressure Tube Sagging in Accidental Coolant Loss” | DAE
(BRNS) |
31.54 |
| Pradeep Kumar | Development of Performance Studies of Evaporative Pattern Casting Process | DST | 14.25 |
| K.N.Agarwal | Centre for Heat Transfer Studies in Eco Friendly Refrigeration System | MHRD
(TAT) |
7.00 |
| Pramod Kumar Jain | Development of a Re-configurable Manu-facturing System (RMS) framework using autonomous and Cooperative agent – based technology | MHRD
(R&D) |
8.00 |
| Pradeep Kumar | Pattern Tooling and Quality Optimization of Investment Castings | MHRD
(R&D) |
8.00 |
2004-05
| Principal Investigator | Name of Project | Sponsoring Agency | Outlay (Amount
in Lakhs of Rs.) |
| B.K. Mishra | Effect of asymmetric heating of fuel pins on fuel bundle integrity | BRNS | 5.04 |
| H.S. Shan | Enhancing Capability of Abrasive Flow Machining Process | DST | 7.98 |
| N.K. Mehta | Software Development for Manufacturing Planning & Control in Automated Manufacturing System | AICTE | 9.00 |
2005-06
| Principal Investigator | Name of Project | Sponsoring Agency | Outlay (Amount
in Lakhs of Rs.) |
| B. K. Gandhi | Slurry Erosion Properties of Laser Claddings | BRNS | 9.28 |
| K.N. Agarwal | Centre for Heat Transfer Studies in Eco Friendly Refrigeration System | MHRD | 7.00 |
| S.P. Nigam | Modernization of Mechanical Engineering Laboratories | MHRD | 9.00 |
| Head | Fund for Improvement S&T Infrastructure in University and Higher Educational Institution (FIST) | DST | 20.0 |
2006-07
| Principal Investigator | Name of Project | Sponsoring Agency | Outlay (Amount
in Lakhs of Rs.) |
| Pramod Kumar Jain | Development of A Re-configurable Manufacturing System (RMS) framework using autonomous and Cooperative agent – based technology | MHRD
(R&D) |
8.00 |
| Pradeep Kumar | Pattern Tooling and Quality Optimization of Investment Castings | MHRD
(R&D) |
8.00 |
| P.K. Sahoo | Simulation of Pollutant Despersion from a chimney Using CFD | DST | 7.26 |
| S.C. Solanki | Solar Thermal Energy Storage Using PCM Capsules Assembled as a Packed Bed | DST | 19.76 |
| B.K. Gandhi | Cost-effective transportation of bulk solids through slurry pipelines | MHRD
(TAT) |
14.00 |
Continuing Sponsored Research Projects
| Principal Investigator/ Coordinator | Name of the Project | Sponsoring Agency | Outlay (in lakh of Rupees) |
| D.K. Dwivedi | Development of Wear resistant Piston materials | CSIR, New Delhi | 9.26 |
| Dr. V.H. Saran | Collaboration in Research & Development of New Curriculam in Sound and Vibration. | EU-Asia Link Program | Rs. 578 |
| Pradeep Kumar | Development and Performance Studies of Evaporative Pattern Casting Process | DST | 14.25 |
| B.K. Mishra | Near Net Shape Manufacturing of Metal Matrix Composite through Investment Casting Process | MHRD | 14.00 |
| P.K. Sahoo | Channel Heat Up Experiment –I: Pressure Tube Sagging in Accidental Coolant Loss | BRNS | 31.54 |
| P.K. Sahoo | Simulation of Pollutant Dispersion from a chimney Using CFD | DST | 7.26 |
| S.C. Solanki | Solar Thermal Energy Storage Using PCM Capsules Assembled as a Packed Bed | DST | 19.76 |
| B.K. Gandhi | Cost-effective transportation of bulk solids through slurry pipelines | MHRD | 14.00 |
New Sponsored Research Projects
| Principal Investigator | Name of the Project | Sponsoring Agency | Outlay (in Lakh of Rupees) |
| A.K. Sharma | Microwave Joining of Metals | SRIC, IIT Roorkee | . 1.0 Lac |
| B.K. Gandhi | Development of non-cobalt base cavitation resistant surface by laser cladding process. | BRNS | 14.6 lac |
| B.K. Gandhi /
D.K. Dwivedi |
Development of non-cobalt base cavitation resistant surface by laser cladding process | BRNS, Mumbai | 13.95 |
| Dr. Satish C. Sharma | A Parametric Study of Performance of a Coriolis Mass Flow Rate Meter. | DST | 19.8 |
| N. Arora /
D.K Dwivedi |
Process Modelling of Twin Wire Welding System | DST, New Delhi | 9.38 |
| P. M. Pathak | Design, Fabrication and Control of a Planer Cooperative Space Robot | SRIC, IIT Roorkee | 1.0 Lac |
| V.K. Goel | Influence of Low Frequency Vibration on Activity Comfort while Traveling by Railway Vehicles. | SIDA, Stockholm | 35.10 Lacs (received by KTH) |
| V.Huzur Saran | Effect of Low Frequency Vibration on Human Comfort. | SERC, D.S.T. | Rs. 43.93 lacs |
| D.K Dwivedi | Investigation on the Failure of Aluminium Wound Distribution Transformers and Recommendation of Suitable Material for Manufacturing Distribution Transformer Windings (R & D) | MOP, GOI | 10.04 lacs |
